Nozzles 

79101 Copper nozzle 12" with standard tip
79105 Copper nozzle 12" with wide angle tip
79102 Copper nozzle 18" with standard tip
79115 Stainless steel nozzle 12" with standard tip
79116 Stainless steel nozzle 18" with standard tip
9429 Standard Nozzle Tip for Copper or S.S. Nozzle
9429A Pinpoint Nozzle Tip for Copper or S.S. Nozzle
9429B Wide Angle Tip for Copper or S.S. Nozzle
79104 Copper nozzle 12" with standard tip and magnetic base
79118 Stainless steel nozzle 12" with standard tip and magnetic base
79107 Loc-Line nozzle 12" with standard tip and magnetic base
79108 Loc-Line nozzle 18" with standard tip and magnetic base
79112 Loc-Line nozzle 12" with mounting "T" and hex nut, hose barb, no mag base
79111 Loc-Line nozzle 18" with mounting "T" and hex nut, hose barb, no mag base
79121 Loc-Line nozzle 12" with standard tip (barb and coupler).  "Bridgeport Style"
79122 Loc-Line nozzle 18" with standard tip (barb and coupler).  "Bridgeport Style"
  79129 Loc-Line nozzle 18" with wide angle tip and magnetic base
  379171 Loc-Line 18" with standard tip and Mounting Block
  79149  Copper Nozzle 12" Standard tip, on Mounting Block 
  9863 In-Line Atomizer on Magnetic Base with 12" Copper Nozzle
9871 In-Line Atomizer on Magnetic Base with Loc-Line Nozzle
  9872 In-Line Atomizer with 12" Loc-Line T fitting No Magnet
9693 In-Line Atomizer

The in-line atomizer is a chamber which is used to mix the lubricant and air into a atomized spray

9692 Band Saw V Nozzle

This nozzle is designed to point directly at the teeth of the band saw blade.  Designed to apply an even coat of lubricant to a band saw blade.

9878 Nozzle for Circular Saw Blades Angled 

This new design for 2008 is now more compact making it easier to install and the internal atomization chamber produces a better more even spray pattern than previous versions.

More Information

9696 Nozzle for Band Saw N-Nozzle (1" to 1.75")

This new more compact design makes it easier to install and the internal atomization chamber produces a better more even spray pattern than previous versions.

More Information

9877 Nozzle for Band Saw Blades up to 2 1/8" 
(two inputs three Outputs) requires a two nozzle applicator.

Larger band saw blades need the additional lube of a second pump.  This nozzle gives you the secure installation for larger saws.

9857 Discontinued replaced by 9877.  Nozzle for Band Saws R-Nozzle short throat

(two inputs three Outputs)

9620 This right angle adapter works with the new generation specialty saw nozzles to change the hose connection direction.  Great when you want to install in a tight space or just want the hose out of the way.
Compatible with: 9693, 9692, 9878, 9696, 9877

for more details click here

379165

 

Medium Diameter Circular Saw Blade Nozzle Requires a three pump applicator
9045 Large Diameter Circular Saw Blade Nozzle Requires a three pump applicator
379160 Auxiliary Air Blow-Off Nozzle Assembly

Remove chips with this independent flow control blow-off nozzle.  Install before the filter/regulator on any Accu-Lube applicator.  Use air to blow chips away from the cutting tool and allow the fluid air/oil nozzle deliver the lubricant to the tool.

9673 Quick Disconnect assembly for Air/Oil Coaxial
hose (Threaded)
Disconnect and reconnect the coaxial air/oil hose assembly with this simple clever fitting assembly.
More information click here 
9371 Hose Clamp, Used to clamp our braided air hose to a nozzle or hose barb.
9595 Nozzle Mounting Block 1/4" NPT. 
This aluminum block is drilled through and tapped 1/4" NPT at both ends to hold lock line nozzles and hose barbs as required.  One mounting hole tapped to 12-24 for secure mounting.
9270 Brass Bushing 1/4" X 1/8"FNPT
  9326 Nozzle Mounting Block 1/8" NPT.
This aluminum block is drilled through and tapped 1/8" NPT at both ends. Two mounting holes tapped 10-32 for secure mounting.
79130 Slip Fitting for Copper or Stainless Steel Nozzle.

Hold a nozzle in place with this slip fitting.  Just tap a hole 1/8"NPT nozzle slides through and clamps down.

9420 Standard Tip for Loc Line Nozzle
79135 Wide Angle Tip Assembly for Loc Line Nozzle
 
9062 Quick Connector Straight Through Assembly 1/8"NPT
9061Quick Connector Female 1/8"NPT
9060 Quick Connector Male 1/8"NPT
  9260 Brass Hose Barb 1/4" X 1/4"NPT 
9259 Hose Barb 1/4" X 1/8"NPT
90004 Quick connect nozzle system for stamping dies with standard tip
Nozzles for Air/Oil Mix Systems
79114 Copper nozzle 12" for air-oil mix with standard tip and press fitting
79125 Stainless steel nozzle 12" for air-oil mix with standard tip and press fitting
  90003 Copper nozzle 12" magnetic base for air-oil mix with standard tip and press fitting